Enterprise productivity is an important yardstick to measure the use efficiency of production (resources), that is the same number of products as the cost on material, labor and production facilities. For manufacturing enterprises, the effective increase production efficiency is the key to lowering the cost of production.

Of course, we must be in strict accordance with standards of operation, in order to enable the operator to a better understanding of production processes, improve work efficiency, and should be from top to bottom two processes were careful analysis and understanding, adhere to the principle of continuous improvement process, to the extent feasible way, and in a most reasonable practices.

In our work, we should consider whether the following questions: 1. Is doing an action necessary?  Is there a better way? 2. Why here? Whether a more suitable place? 3. Why do this, is there a more appropriate time?

Then, on how to improve the productivity of this problem, I work in conjunction with our own experience at the scene by the following views:

(1) Improve our operating habits
1. Maintain good posture and the body of the table with a more reasonable and conducive to operations.
2. In the production process to make full use of his hands in the production.
3. Operating range, as far as possible in the short-distance mobile to enhance utilization of time.

(2) A reasonable allocation of the workplace, pay attention to the location of raw materials
1. Hand and arm movement should be in the normal work region (normal sitting hand to touch on the scope).
2. The attention of the eyes must be used, to ensure that there are normal vision can see at operating conditions.
3. Tools and materials should be placed in a fixed position, to facilitate a holding. Can also be the most commonly used, high repeat usage of materials placed on the foreground, in accordance with the order of placing material assembly

(3) Tools and equipment
1. Tools and equipment should be placed in areas easily can get.
2. Design and use of simple tools or tooling to make production more smoothly, more reasonable and convenient operation.

(4) Material Handling
1. A good design should be in advance for convenient taking and bring.
2. Consider whether the principle of gravity on the design tooling materials will be sent the point of use.
3. Preferences and classification processes for the next marked materials and spare parts.

(5) Saving time
1. Work should be concentrated spirit; this would both improve the artificial delay or suspension problems. At the same time also to avoid accidents. Such as iron burn injury, and other items.
2. We work on the analysis of the action, those actions are necessary, these actions can be combined, and such steps will reduce, but also shorten the time.

If an employee through effective way to save one minute a day, that day workshop 400 employees will be able to save 400 minutes, and so on, that share of the company more than a year can produce as many products? If we progress a little bit every day, every day thinking a little bit more, not only to themselves in various fields will be improved,