Onboard installation standard
N1 series installation manual
N2 series installation manual
N3 series installation manual
N5 series installation manual
N53 series installation manual

I. Have a strict electric current safe examination to the charged circuit and select the wires with enough electric current capacity.

II. Use the plug-in way when connect power lines to one end of the equipment and reduce the times of peeling and wrapping adhesive plaster during the installation maintenance to avoid fall-off or short-circuit. The front end should have the fuse in case of short-circuit in the permission scope of electric current.

III. There should have a switch or fuse box in the place where onboard products connect the battery.

 

a. When the battery works, you must add a suitable fuse near the battery.

b. Power line must be added a reinforced cover(similarly as our black cover used last year), to reduce the danger of car inside lines busted.

c. When the battery works, the part of preoperculum needs a fireproof cover,therefore the working engine power lines would face high temperature roasting, and it has a risk of short-circuit.

d. Do the extreme tests to the products, for example, sealed test, high temperature test, adequately consider the security issue in an extreme case.

e. After onboard product on car test finished, you shouldshut down the power line.

f. After onboard products on car installation finished, you should check whether the power lines connect correctly, adding fuse box or not to make sure the power connection is safe. And you should tell us the hidden security trouble which the installation engineer could not solve temporarily.

 
 a. Improve the power line; add a fuse box
b. Improve the power line ed, add a fuse box, and add a switch on the front-end of the onboard host computer .
 
a. Lines standard
Lines Current standards Color Temperate Remarks
N1 Power+
10A
Blue
80  
Power-
10A
Black
80  
screen---host computer ACC
5A
Red
80 On the mount screen, the line is extremely thin, which is not convenient to operate.
N2 Power+
10A
Blue
80  
Power-
10A
Black
80  
screen---host computer ACC
5A
Red
80 On the mount screen, the line is extremely thin, which is not convenient to operate.
N5 Power+
10A
Blue
80  
Power-
10A
Black
80  
screen---host computer ACC 5A Red 80  
b. Installation accessories
Titles Standard Remarks
Frequency divider

(in stock )

Using frequency divider in stock, but needs to change the power line
VGA EXTW
(in stock )
Using VGA EXTW in stock
Power connector
  Unfound object
Power line defended bushing
  Unfound object
Fuse box (refer to the  screen fuse box) Host computer power supply adds 5A fuse box, similar to the onboard screen.
c. The power supply mode of the installed vehicle and possible hidden security trouble
(1) Monitor power supply:
    Onboard screen gets power form car CD power supply. Onboard screen has a 2A fuse box, CD machine itself has 15A fuse box, the screen power supply does not have the hidden security trouble in theory.
 
(2) host computer power supply:
    In the installed types of cars, host computer gets power from car battery or car CD machine power supply. The two kinds of methods are account for a half. At present the host computer does not have a fuse box, so in theory there is a large hidden security trouble when the host computer gets power.
 
Wuhan Bluestar Technology 
Hiinfo Got The Focus Atten
We were awarded ISO/TS1694
Wuhan Bluestar Technology 
Bluestar was awarded advan
The Company Passed the 200
More
6 Products of Hiinfo Onboa
How to Choose Automotive I
CAN and LIN Comparison
Product Appearance Designs
Car Computer Overhaul Note
Use Feelings on Bluetooth 
More
Pioneer&Innovation - for t
Hubei Daily, Yangtze River
Hiinfo Onboard Computer an
More