 |
|
 |
|
The onboard information product specially designed for car repacking factory
1. Strong functions fully in stead of the original car sound system, provide newest information experience;
2. Structure design, panel can be designed and customized completely for original car;
3. Standard design, instant insert and install with many types of original car wires;
4. Unify with the electron height of car body, may extensive to realize the function of Bluetooth network and fault detection;5. Embedded software and hardware design, working steadily and reliably.
|
 |
|
|
 |
 |
| |
i. This machine is only used 12V DC power supply system with negative grounding
This machine cannot be directly used automobile with the 24V power supply system; it must install the power inverter, or connect to one of the two batteries first. Otherwise, it may cause fire and damage.
ii. Don't disassemble or repack this machine
This machine cannot be directly used automobile with the 24V power supply system; it must install the power inverter, or connect to one of the two batteries first. Otherwise, it may cause fire and damage.
iii. Do not install this machine in the place where hinder the operation of aerocyst or the steering wheel and the gearshift lever..
Otherwise, it may cause accident or personal hurt.
iv. Only use the indicated fuse
Please use the same specific fuse (current standard) when change the fuse. Or else, it may cause fire. |
 |
Cautions: |
Tips on power line (yellow) |
a. Do not press the electric wire under the bolt or clamp in the mobile part (for example seat armrest).
b. Before connection, please turn the ignition key to OFF to avoid short-circuiting.
c. Only after all other leads being connected can the red and the black power input wire be connected.. |
a. When this machine is connected to other three-dimensional acoustic parts, the nominal current of the connective automotive circuit must be bigger than the sum total of nominal current of each fuse.
b. When the nominal current of automotive circuit is not big enough, this machine can be directly connected to the battery. |
|
|
| * Tip on safety |
| Please obey the traffic rules in your country. |
| |
 |
|
| The number in the list matches the number in the instruction |
| No. |
Descriptions |
Quantity |
Remarks |
(1)
|
Host computer |
1 |
|
| (2) |
Right fixing mount |
1 |
|
| (3) |
Left fixing mount |
1 |
|
| (4) |
Fixing screws for mount |
8 |
Optional to buy |
| (5) |
Fixing screws for mounting bar |
4 |
Optional to buy |
| (6) |
High speed connector |
20 |
|
| (7) |
External power supply wire |
1 |
|
| (8) |
Loudspeaker wire |
1 |
|
| (9) |
External audio&video line |
1 |
|
| (10) |
Conversion line (MINI USB5PM to USBAF) |
1 |
|
| (11) |
External GPS antenna |
1 |
|
| (12) |
High speed fixing frame |
1 |
With double-sided tapes |
|
| * Accessory pictures (as follows) |
 |
| |
 |
|
| Please refer to the automotive system connection for details, and also must refer to all the other parts instructions in the system. |
 |
|
| Please refer to the ¡°automotive system connection¡± for details. |
 |
Connection information |
| Please use the high speed connector, and refer to the following table or the connecting picture above to connect. |
| Host compute |
Automobile |
Yellow
|
Battery positive |
| Red |
ACC power on the ignition switch |
| Blue |
Backup light positive |
| Black |
Metal spot on the chassis |
|
| |
·Using high speed connector |
 |
|
Automotive system connection |
| |
Please refer to other parts instructions in the system. Please refer to the "connection information". |
| |
Avoid the accident caused by short-circuit
To avoid the accident caused by short-circuit, only when all the wires are connected and the ignition key is on OFF connect the power line (yellow and red), otherwise, accidental short-circuit may cause electric shock and serious damage.
When the fuse melts
please check the circuit to find the reason before change it. When change it, please use the same specific fuse (current standard). It¡¯s dangerous to use different fuse or connect with wires, which may cause serious damage.
All the following leads should be connected
otherwise£¬may cause electric shock¡¢device damage or fault.
·Connect the blue lead to the car backup light.
·Connect the yellow lead to the battery positive.
·Connect the red lead to car power ignition switch.
·Connect the black lead to the metal spot on the chassis |
| |
|
| |
|
| |
|
| |
Connection example |
| |
|
| |
|
|
Installing the host computer |
| |
·After all the connection finished£¬install the machine into the dashboard |
| |
Before installation |
| |
·The design of this machine is very safe£¬but wrong installation may cause accident. Confirm the following before installing. |
|
Installing the host computer |
| |
Once insert the CD in the machine, make sure not obstruct the use of emergent-operation switch or other important control parts. |
| |
|
| |
Choose the installing position
¡¤Turn the ignition key to OFF or pull it out
¡¤Put the device into the planned installing position£¬check the length of cable and the installing conditions of the host computer |
| |
Tips
To properly install and use the machine, there should be at least 180mm distance between the closest position of gearlever and the surface of the machine. The height of the machine is 110mm. |
| |
|
| |
|
| |
·at least 180mm away from the surface
When install the machine, the machine must be powered off; if it is on and overexert, it is possible to cause fault. Notice: the fixing mount may be different according to car types and shape..
a. install the left and right mounts |
|
| |
b. put the onboard computer to the original CD machine position in the dashboard, install the screws well. |
 |
| |
c. according to the dashboard size, cut the high speed fixing frame to the appropriate size along its outside, and use the special double-sided tape to stick it to the plague surface of original car |
 |
| |
| |
The device should be installed on the horizontal position, the front end be a little higher but less than 5¡ã.(Refer to the following picture) |
 |
| |
|
After installation and connection |
| |
Start automobile engine. Confirm that the brake light, the loudspeaker, and all electrical part are working.
Put through the switch line of host computer, the system can operate. |
| |
Notice£º
To avoid damage, do not use pin
or overexert to press the button.
After installing the device, tighten
all the loose electric wires. |
 |
| |
| |
·Fuse blown
Check whether the red and black lead ports connected right
·The power supply cannot be on
Check whether the yellow lead wire has been connected or not
·The speaker has no sound
heck whether the speaker output is short-circuited or not
·Sound distortion
Check whether the speaker output terminal connected GND
Check whether the left and right terminals negative connected GND together
·Noise disturbs tone quality
Check whether the power line and the signal line are separate routing
If not, inspect whether uses the aluminum foil adhesive tape to wrap the signal wire
|
| |
|
|
|
 |
|
|
|
| More |
|
